Note: If you click a link on this page, then go on to make a purchase, we may receive a commission but at no extra cost to you.

Top 10 Best mic stand counterweight Reviews

Top 10 Rated mic stand counterweight in 2022 Comparison Table

SaleBestseller No. 1
KIWI design Comfort Head Strap Accessories Compatible with Quest 2, Elite Strap Replacement for Enhanced Support
  • Enhanced Side Straps: The side straps of our elite strap adopted upgraded polymer material which is eco-friendly and has extreme tenacity and sturdiness that could stand over 10,000 times bending so you don't have to worry that the side strap will snap
  • Optimized Wearing Design: With the 52° adjustable hinge, just gently flip up Quest 2 and you can check your surroundings without the trouble of loosening the knob to take off the head strap. Also, this design is very convenient for you to put on or take off the head strap, especially for people who wear glasses
  • Enlarged Head Support: The whole head strap weighs 350g, it has larger head support than the official one, fits head circumference 17.7-29.5inch, the enlarged head support can better fit and cup your head, which will make the head strap more stable and comfortable
  • Upgraded Cushions: The widened 46mm top strap pad and the thickened 16mm head cushion can effectively improve the comfort and reduce pressure when wearing the headset, and the soft PU leather surface makes it very easy to clean the cushions. Maintenance is simple and easy. All you need to do is to wipe the foams with a wet towel and a microfiber cloth came with the package during the game break session
  • Easy to Carry & Store: Our head strap can fit in the official carrying case and most carrying cases on the market so you can rest assured to take it on your travel and won't worry about the storage. Note: Please detach the back bracket first to put it into the official elite strap carrying case
Bestseller No. 2
f.64 LSB - Photography Light Stand & Tripod Bag Case - fits light stands & tripods up to 36 inches long - fits multiple lightstands tripods umbrellas and accessories f64
  • Constructed with durable 600 denier polyester fabric.
  • Fits light stands and tripods up to 36 inches long
  • A roomy internal pocket will hold umbrellas while two zippered pockets on the ends hold accessories.
  • Carry it either by its detachable shoulder strap or the wraparound leather carrying handle.
  • Interior dimensions: 7" x 7" x 36" Volume: 1,764 inches.
Bestseller No. 3
Amazon Basics Adjustable Boom Height Microphone Stand with Tripod Base, Up to 85.75 Inches - Black
  • Adjustable microphone stand designed to hold a microphone securely in place (microphone clip sold separately) at the height you choose
  • Long boom arm with molded plastic counterweight; adjust to standing height for singing or speaking or seated height for playing an instrument
  • Versatile design folds flat for use as straight mic stand; max height 85.75 inches; base width 21 inches
  • Sturdy steel construction; ultra-light for easy transport
  • Compatible with 3/8-inch to 5/8-inch adapter; clip-on cable holder keeps cords out of the way
SaleBestseller No. 4
CAHAYA Tripod Microphone Stand Boom Arm Floor Mic Stand with Carrying Bag and 2 Mic Clips for Singing Performance Wedding Stage and Mic Mount CY0239
  • Stable Tripod Base: CAHAYA tripod boom microphone tripod legs extends further than others which can stand holds microphone securely in place. Non-slip foot cover prevent it from moving around.
  • Carrying Bag & Universal Mic Clips: it comes with carrying bag and 2 mic clips: barrel style & clothespin style, fits for most types of microphones.
  • Stand Height Adjustable: microphone stand height can be adjusted from 25.2”/64cm to 62.2”/158cm, perfect floor use mic stand for stage performance, speeches, meeting rooms, party, wedding, karaoke sing or live broadcasts etc.
  • Extendable & Removable Boom Arm: boom arm extends freely within 16.9”-30.1” (43cm -76.5cm) and 360° angle rotatable through adjustment knobs which allows for easy positioning. Simply remove the boom arm and attach microphone clip to convert the mic stand into a traditional straight mic stand.
  • Portable and Easy to Assemble: all parts could be stored in a provided carrying bag for convenient transport.
SaleBestseller No. 5
ABCCANOPY Sandbag Photography Weight Bags for Video Stand,4 Packs (Black)
  • Our sand bags photoshoot stand has 2 zipper pouches each, saddlebag design for easy use.
  • Dual 10.25" x 9.25" interior compartments
  • Each sandbag weights rated for 25lbs.
  • 4 sandbags included! SANDBAGS ARE EMPTY AND DO NOT COME PREFILLED WITH SAND OR WEIGHTS
  • WHY BUYING FROM US: ① Made of 1680D Polyester Fabric, Usually can be used for 5 years, ② 10% Bigger than other bag, it can hold more sand.③ Double zipper Design for extra security ④ Bonus 4x Aluminum Carabiner
SaleBestseller No. 6
Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.) - PMKS5
  • HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread size
  • RELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placement
  • CONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term use
  • STUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its own
SaleBestseller No. 7
InnoGear Mic Stand, Microphone Stand Universal Boom Mic Stand Detachable Mic Stands with Weighted Round Base, Height Adjustable from 34" to 60" for Blue Snowball Blue Yeti Shure SM58 Samson Q2U
  • Height & Angle Adjustable: The height of this InnoGear mic stand is adjustable from 34 inches to 60 inches. By adjusting the clutch, you can set up your desired height with ease. The included mic clip can be rotated by 180°. You can adjust the angle of microphone easily while performing.
  • Heavy-duty & Stable Round Base: The weighted round base of the microphone stand weighs 4.5 Lbs in the diameter of 9.8 inches, ensuring solid and durable usage. The bottom of base is built with non-slip pads. A metal gasket is added between the connection of base and the boom mic stand to further enhance stability and avoid any wiggle.
  • Sturdy & Thickened Arm: The upgraded steel arm is thickened to 1.5mm, compared to only 1mm of other microphone stands on the market. It is sturdy enough to hold your microphones, not easy to be deformed. The arm and the base is so stable that the boom stand is not easy to tip over.
  • Detachable & Portable Stand: InnoGear microphone stand can be disassembled into three parts in seconds. It is easy to carry and install which provides great convenience for various types of activities like stage, studio, road show, concert, outdoor performances and more.
  • Wide Applications: This upgraded mic stand fits for most types of microphones like Fifine K669B, Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on.
SaleBestseller No. 8
SmallRig Super Camera Clamp Mount, Double Ball Head Adapter, Fence Desk Table Mount for Ronin-M/Insta360/Gopro, Ball Head - 1138
  • [High-Quality Material] This SmallRig ballhead mount clamp is made of aluminum alloy and stainless steel which is very well built and is very long-lasting. It is a perfect and study ballhead mount for people who love making videos.
  • [Multi-function Double Ballhead with Wide Compatibility] The 1138 muti-functional double ball head comes with a clamp at the bottom and a 1/4 inches screw on the top best for vlog/youtube/tiktok. It can mount monitor/small action camera/LED Lights/microphones/flash or any gears with a bottom 1/4" thread on its one end via 1/4" screw and then you can lock it on rod/tube/table/desk/tripod via the clamp tightened by the locking knob.
  • [Perfect Viewing Angle] The mounts are easily adjustable and can swivel 360-degrees which allows you to adjust your cameras at your desired angle.
  • [Dimensions] The side of the ballhead mount is 3.74 in length, 3.35 inches in width and 0.98 inches in height. It weighs around 0.2 kg and can take up to 1.5 kg / 3.3lb weight.
  • [Package Includes] The total package contains 1 x SmallRig ballhead mount clamp, with a hassle-free customer service.
SaleBestseller No. 9
BILIONE Upgraded Desktop Microphone Stand, Adjustable Mic Stand Desk with Pop Filter, Shock Mount, Microphone Clip, 5/8" to 3/8" Metal Screw Adapter
  • [All-in-one comboo]Professional Recording Studio Equipment with adjustable desk microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, Microphone clip. All the items of the package can meet your need for live streaming, broadcast, audio recording and more.
  • [Rock Solid]BILIONE Mic Stand Desktop made a new upgrade to Weighted Base and Metal Rod. The new version all-metal base weighs 1.5lbs, measures 5.1inches (13cm) in diameter, and has an anti-slip pads on the bottom to avoid noise when moving. We thickened the diameter of the metal rod to 0.74inches to easily support heavy microphones without falling over.
  • [Two-Screen POP Filters]The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those scary "plosives" that follows "B" and "P".
  • [Excellent Shock Mount Effect]Please noted the shock mount is not fit for Blue Yeti.It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Suitable for mikes with a diameter of more than 1.77"/4.5cm, and Max diameter:2.05"/5.2cm.
  • [Strong Compatibility and Applicability]Package includes 3/8" to 5/8" adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2035, HyperX QuadCast, QuadCast S, Razer Seiren X etc. Adjustable shock mount and universal mic clip also provide more possibilities.
SaleBestseller No. 10
Rode PSA1
  • Broadcast-style Professional Studio Desk Boom Arm with Stard Microphone Threading
  • Over 3' Hizontal Vertical Reach
  • 360-degree Rotation
Are you Googling for top 10 good mic stand counterweight for the money in 2022? Our company had scanned more than 82,357 customer reviews about top 10 best mic stand counterweight in 2022. All you need is to find the right one for you, which is why we’ve put together this review of the top 10 best mic stand counterweight in 2022 for you and currently available. We decided to review the very best mic stand counterweight currently on the market 2022, so let’s go through them and find the perfect ones for you.. We have ranked the best brands from AI and Big Data, please see below:

Our Best Choice: On-Stage Counterweight (CW-3)


Our rating:4.7 out of 5 stars (4.7 / 5)





[ad_1] Sound-steel produced counterweight attaches conveniently and securely to your increase or shaft for added balance and balance. On-Stage is a leader, changing the way musicians display screen, support, and safeguard their prized instruments and equipment. Tunes people today proprietary products like On-Phase stands and the many others, industry’s most innovative stands and add-ons.

Nylon tipped screw grips shaft securely
Perfect for off-setting significant mics on booms or offering steadiness to stands by attaching to cheapest aspect of shaft or legs
New music persons proprietary product or service like On-Phase stands and the many others
Industry’s most impressive stands and extras

Categories Top 10

Leave a Comment